LAN CAT.5e cables from LAPP KABEL for \"Structured Cabling\" meet the requirements in acc. with EIA/TIA-568andTSB36 as well as ISO/IEC 11801 or EN 50173 (Class D).
They are mainly used where the terminal density is very high, e.g. for wiring of office, administration and R & D buildings in the tertiary area (horizontal).
Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100m in accordance with the ISO/IEC 11801 and EN 50173 standards (90m in cable duct, 10m in working area).
FTP and S-FTP cables are specified up to 200 MHz
The impedance of these cables is 100 Ohm +/-15%
EIA=Electronic Industries Association
TIA=Telecommunication Industries Association
TSB=Technical Systems Bulletin

LAN CAT.6ecable from LAPP KABEL for "Structured cabling systems" meet the requirements in acc. with EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (class D).
They are mainly used where the terminal density is very high, e.g. for wiring office, administration and development buildings in the tertiary area (floor wiring).
N.B.:The cable length in the tertiary range (floor) should not exceed a length of 100m according to the standards ISO/IEC 11801 or EN 50173 (90m in the cable channel and 10m in the working area.
The wave resistance of these cables is 100 Ohm +/-15%.
EIA = Electronic Industries Association
TIA = Telecommunication Industries Association
TSB=Technical Systems Bulletin

LAN CAT.7*cable for high speed networks (e.g. Gigabit-ETHERNET). They exceed the requirements according to EIA/TIA-568 and TSB36 as well as ISO/IEC 11801 or EN 50173 (Class D).
Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100m in accordance with the ISO/IEC 11801 and EN 50173 standards (90m in cable duct, 10m in working area).
LAN CAT-7* cables are specified up to 600 MHz.
All STP PiMF cables characteristic impedance Ohm +/- 15%
EIA = Electronic Industries Association
TIA = Telecommunication Industries Association
TSB=Technical Systems Bulletin

Note:

Application in "structued cabling".
Meets requirements acc. to draft of Standard prEN 50288-4-1 (August 2000). Exceeds the requirements of Standard EN 50173 and ISO/IEC 11801. The cable is specified up to 1.2 GHz.
Cable length in tertiary area (horizontal area, floor) should not exceed a length of 100m in accordance with the ISO/IEC 11801 and EN 50173 standards (90m in cable duct + 10m in working area).